SAMPLE NCP-MCI-6.10 QUESTIONS - VALID NCP-MCI-6.10 EXAM CAMP

Sample NCP-MCI-6.10 Questions - Valid NCP-MCI-6.10 Exam Camp

Sample NCP-MCI-6.10 Questions - Valid NCP-MCI-6.10 Exam Camp

Blog Article

Tags: Sample NCP-MCI-6.10 Questions, Valid NCP-MCI-6.10 Exam Camp, NCP-MCI-6.10 Dumps Discount, NCP-MCI-6.10 PDF VCE, Valid NCP-MCI-6.10 Test Syllabus

To fit in this amazing and highly accepted exam, you must prepare for it with high-rank practice materials like our NCP-MCI-6.10 study materials. Our NCP-MCI-6.10 exam questions are the Best choice in terms of time and money. If you are a beginner, start with the learning guide of NCP-MCI-6.10 Practice Engine and our products will correct your learning problems with the help of the NCP-MCI-6.10 training braindumps.

Nutanix NCP-MCI-6.10 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Conduct Custom Monitoring within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Analysts and Systems Engineers and covers custom monitoring for optimized performance management. Candidates must analyze performance charts, set retention policies, create custom service level agreements (SLAs), and manage storage based on policies. Creating reports involves identifying the required type, selecting generation frequency, determining retention properties, and customizing report formats for different monitoring needs. Effective monitoring ensures better resource utilization, system efficiency, and proactive issue resolution within the multi-cloud environment.
Topic 2
  • Configure Disaster Recovery and Data Protection within a Nutanix Multicloud Environment: This section of the exam measures the skills of Disaster Recovery Specialists and Cloud Engineers and covers configuring protection policies and domains for data security and recovery. Candidates need to identify the right entities for protection, schedule backups, define retention policies, and set up replication to remote sites. Recovery plans must be configured and executed with proper scripting, network mapping, and failover strategies. Metro replication requires understanding failover methodologies, comparing solutions on different hypervisors, and preventing split-brain scenarios. Effective disaster recovery planning ensures minimal downtime and data integrity across environments.
Topic 3
  • Troubleshoot a Nutanix Multicloud Environment: This section of the exam measures the skills of Technical Support Engineers and IT Operations Specialists and covers diagnosing and resolving common issues within a Nutanix multi-cloud environment. Troubleshooting protection policies and recovery plans requires identifying network mapping failures, vNIC issues, script execution problems, and connectivity failures. Metro replication troubleshooting involves addressing naming conventions, network limitations, and replication states. Security issues in AOS and Prism Central must be resolved by managing CVM communications, security warnings, and log analysis. LCM operations require diagnosing failures in inventory updates and version upgrades. Performance troubleshooting involves analyzing logs, reading performance charts, and adjusting VM configurations to meet performance needs.
Topic 4
  • Manage Clusters within a Nutanix Multicloud Environment: This section of the exam measures the skills of Infrastructure Engineers and Systems Administrators and covers the administration of Nutanix clusters. Storage management includes creating, reading, updating, and deleting storage containers and volume groups. Configuring AOS and Prism Central settings involves authentication, SSL certificate management, IAM role-based access control, and configuring network segmentation. Network administration procedures focus on creating VLAN-backed subnets, virtual switches, and load-balancing policies while monitoring NIC usage. Lifecycle management includes performing hardware and software updates and maintaining firmware. Hardware maintenance involves adding or removing nodes and physical disks while ensuring proper upgrades and replacements. Intelligent operations require configuring capacity policies, discovering application relationships, and simulating scenarios to optimize performance.
Topic 5
  • Manage VMs within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Administrators and Virtualization Engineers and covers managing virtual machines (VMs) within a Nutanix multicloud environment. It includes creating and updating VMs by determining hardware requirements, boot modes, sizing, and configuration based on application needs. Candidates must understand how to deploy VMs using templates, snapshots, and image configurations, ensuring the correct formats for importing and exporting VMs. Migration processes require knowledge of prerequisites, storage, network settings, and software compatibility. Additionally, configuring VM categories and attributes is essential for proper organization and management within the environment, ensuring alignment with labels, storage policies, and security settings.

>> Sample NCP-MCI-6.10 Questions <<

NCP-MCI-6.10 Cert Torrent & NCP-MCI-6.10 Actual Answers & NCP-MCI-6.10 Practice Pdf

Taking the Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) NCP-MCI-6.10 test and beginning Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) NCP-MCI-6.10 exam preparation with the suggested NCP-MCI-6.10 exam preparation materials is the best and quickest course of action. You can rely on Nutanix NCP-MCI-6.10 Exam Questio Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) NCP-MCI-6.10 for thorough NCP-MCI-6.10 exam preparation.

Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) Sample Questions (Q33-Q38):

NEW QUESTION # 33
An administrator is working with anetwork engineerto design thenetwork architecture for a DR failover.
BecauseDNS is well-designed, theDR site will use a different subnetbutretain the same last octetin the IP address.
What is the best way to achieve this?

  • A. Use a custom script to update the IP address after instantiation in DR.
  • B. Utilize Recovery Plan Offset-based IP mapping.
  • C. Set up IPAM so the address is dynamically assigned during DR.
  • D. Manually log into VMs after the DR event and update the last octet.

Answer: B

Explanation:
Offset-based IP mapping in Nutanix Recovery Plans allows automatic subnet changes during DR failover.
* Option D (Utilize Recovery Plan Offset-based IP mapping) is correct:
* This methodautomatically adjusts the IP rangewhile keeping the same last octet.
* It eliminates the need formanual interventionafter failover.
* Option A (Custom script) is incorrect:
* Scripting is an option, butRecovery Plan IP mapping is simpler and native to Nutanix.
* Option B (Use IPAM) is incorrect:
* IP Address Management (IPAM) is useful, butoffset-based mapping provides more control.
* Option C (Manually update IPs) is incorrect:
* This would betime-consuming and error-prone.
References:
* Nutanix Disaster Recovery Guide #Using Offset-Based IP Mapping
* Nutanix KB #Best Practices for Managing IP Addresses in DR


NEW QUESTION # 34
An administrator is trying toconfigure Metro Availabilitybetween NutanixESXi-based clusters. However, theCompatible Remote Sitesscreen does not list all required storage containers.


Which two reasons could be a cause for this issue? (Choose two.)

  • A. Source and destination hardware are from different vendors.
  • B. The remote site storage container has compression enabled.
  • C. Both storage containers must have the same name.
  • D. The destination storage container is not empty.

Answer: C,D

Explanation:
Metro Availability in Nutanix requires that the primary and secondary storage containers be configured identicallyto ensuredata replication consistency.
* Option C (The destination storage container is not empty) is correct:
* Theremote storage container must be emptybefore Metro Availability can be enabled.
* Existing data can cause conflictsand prevent it from appearing in the "Compatible Remote Sites" list.
* Option D (Both storage containers must have the same name) is correct:
* Metro Availability requires thatstorage containers have identical names across clusters.
* If namesdo not match, thestorage container will not be listed as compatible.
* Option A is incorrect: Metro Availability works regardless of hardware vendor differences.
* Option B is incorrect:Compression does not affect compatibilitybut may impact performance.
References:
Nutanix Metro Availability Deployment Guide
Nutanix Best Practices forConfiguring Remote Sites for Metro Availability Nutanix KB #Troubleshooting Storage Container Issues in Metro Availability


NEW QUESTION # 35
An administrator is configuring a protection domain for business critical applications, including SQL, Oracle, and Exchange. The administrator needs to evaluate the requirements and limitations for application-consistent snapshots.
What action should the administrator take while configuring application-consistent snapshots?

  • A. Configure one consistency group for all VMs comprising an App.
  • B. Ensure that Windows VMs have in-guest mounted VHDX disks.
  • C. Configure one consistency group for each VM.
  • D. Select application consistent snapshot checkbox in consistency group settings only.

Answer: A

Explanation:
When configuring application-consistent snapshots in a Nutanix protection domain for applications such as SQL, Oracle, and Exchange, it is critical to group all related VMs in the same consistency group within the protection domain. This ensures that the snapshot captures a consistent state of the entire application stack.
From theNutanix Enterprise Cloud Administration (ECA)course materials:
"A consistency group ensures that snapshots across multiple VMs are taken at the same time, maintaining application consistency for distributed applications. This is especially important for multi-tiered applications like SQL, Oracle, and Exchange, where data integrity depends on coordinated snapshot creation." Additionally:
"For application-consistent snapshots, leverage guest tools or volume shadow copy services (VSS) in Windows to quiesce applications, and configure the consistency group to include all relevant VMs." By creating one consistency group for all VMs comprising an application, the administrator ensures that snapshots represent a consistent state across the application components.


NEW QUESTION # 36
After addingnew workloads, theOverall Runwayis nowbelow 365 days, but thescenario still shows the cluster is in good shape.
Why?

  • A. Because there are recommended resources.
  • B. Because new workloads are sustainable.
  • C. Because Storage Runway is still good.
  • D. Because the Target is 1 month.

Answer: B

Explanation:
A cluster runway below 365 days does not necessarily indicate an issue if Intelligent Operations determines that workloads are sustainable.
* Option B (Because new workloads are sustainable) is correct:
* Nutanixanalyzes resource trendsand marks clusters as healthyif new workloads are within projected capacity.
* Option A (Storage Runway is still good) is incorrect:
* Storage isone component, butCPU and memoryalso affect runway calculations.
* Option C (Recommended resources) is incorrect:
* Recommendations help optimize capacity, butdo not define cluster health.
* Option D (Target is 1 month) is incorrect:
* The scenario's target window does not impact the actual runway calculation.
References:
* Nutanix Prism Central Guide #Capacity Planning & Runway Analysis
* Nutanix KB #Understanding Capacity Runway and Workload Sustainability


NEW QUESTION # 37
An administratormigrated a physical MySQL databasefrom alegacy 3-tier environmentto aNutanix cluster.
After migration, the administrator finds that atpeak load, the number of IOPS is lower than expected, and latency is higher.
Which two steps should the administrator take to improve performance? (Choose two.)

  • A. Createadditional vDisks for SQL data.
  • B. Ensure that theSQL data vDisks are thick provisioned.
  • C. UseLVM to stripe the SQL data across multiple vDisks.
  • D. Ensure that theSQL data vDisks are thin provisioned.

Answer: A,C

Explanation:
For high-performance databases like MySQL, optimizing storage access is critical.
* Option B (Create additional vDisks for SQL data) is correct:
* Multiple vDisks allowbetter parallelismin NutanixDSF (Distributed Storage Fabric), improving IOPS.
* Option C (Use LVM to stripe SQL data across multiple vDisks) is correct:
* Striping across multiple disksdistributes the load, reducing latency.
* Option A (Thick provisioned vDisks) is incorrect:
* Nutanixalways provisions vDisks thinly, and thick provisioningdoes not improve IOPS.
* Option D (Thin provisioned vDisks) is incorrect:
* All Nutanix vDisksare thin-provisioned by default.
References:
* Nutanix Bible #Optimizing SQL Performance on Nutanix
* Nutanix KB #Best Practices for Running MySQL on Nutanix


NEW QUESTION # 38
......

No doubt the Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) (NCP-MCI-6.10) certification exam is a challenging exam that always gives a tough time to their candidates. However, with the help of 2Pass4sure Nutanix Exam Questions, you can prepare yourself quickly to pass the Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) exam. The 2Pass4sure Nutanix NCP-MCI-6.10 Exam Dumps are real, valid, and updated Nutanix NCP-MCI-6.10 practice questions that are ideal study material for quick Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) exam dumps preparation.

Valid NCP-MCI-6.10 Exam Camp: https://www.2pass4sure.com/NCM-MCI/NCP-MCI-6.10-actual-exam-braindumps.html

Report this page